g7 single-station strength - GymStore.com
leg_press_090902.indd 1
9/2/09 9:04 AM
REV. 1.2 PA RT # 0 0 0 0 0 0 0 0 0 0 M AT R I X F I T N ESS SYST E M S | 1 60 0 L A N D M A R K D R I V E COT TAG E G ROV E W I 53 527 USA To l l Fre e 8 6 6 . 693.4 8 63 m a t r i x f i t n e ss . co m Fa x 60 8 . 8 3 9. 8 687 LEG PRESS
G7 SINGLE-STATION STRENGTH IMPORTANT SAFETY INFORMATION
TRICEPS PRESS PLACARD
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
PROPER USAGE Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX Fitness Systems equipment be used properly to avoid injury. Keep hands and feet clear at all times from moving parts to avoid injury.
MAINTENANCE CHECKLIST
CHECK FOR DAMAGED PARTS 1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local MATRIX Fitness Systems dealer. 2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement. 3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. This must be performed by a licensed contractor. 4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals. 5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID INJURY! 1. Never allow children on selectorized strength equipment. Teenagers must be supervised at all times while using this equipment. 2. All warnings and instructions should be read and proper instruction obtained prior to use. 3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program
Daily
Clean Upholstery
FREQUENCY
ACTION
As Needed
Lubricate Guide Rods
As Needed
Clean Grips
As Needed
Clean Machine
Bi-Annually
Inspect Frame
Monthly
Inspect Hardware
Monthly
Clean Guide Rods
Daily
Inspect Cables
Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water. Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and down the guide rods.
PRODUCT SPECIFICATIONS TECH SPECS Overall dimensions
75”L X 43”W x 52”H 946 lbs
Shipping weight
882 lbs
Weight
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts. 5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable. 6. Check to see that the selector pin is completely inserted into the weight stack. 7. NEVER use the machine with the weight stack pinned in an elevated position. 8. Never use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided directly from the manufacturer. 9. This equipment should only be used in supervised areas where access and control are regulated by the owner.
WARRANTY (Valid in USA only)
5 years
Pivot bearings
5 years
Pulleys
5 years
Weight stacks
10 years
Structural parts
10 years
Frame (not coatings)
1 year
Upholstery/cables/grips/springs
3 years
Labor (excluding upholstery/cables/grips)
3 years
Any items not specified
G7-S70 LEG PRESS
Step 1
UNPACKING G7-S70 LEG PRESS
Qty
Item
Description
B22
Flat Washer(φ10)
8
B23
Nylon Nut(M10)
4
Z01
Screw (M10x80L)
4
Z02
Screw (M10x30L)
2
Z03
Spring Washer(φ10)
4
Z11
Arc-flat Washer
2
Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and E9576-2 complaint Class S product. Your MATRIX G7-S70 LEG PRESS is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. The weight stack is shipped in separate packaging to reduce the weight of this box. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
CAUTION
The weight of the G7-S70 LEG PRESS is 531 lbs. (240.9 kg) not including the weight stack. The weight stack tower is packaged completely assembly for ease of installation; use extra caution when removing from its pallet during assembly. The weight stack for this machine is 351 lbs. (159.2 kg). To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box.
Lift the aluminumn wing and top cover, then take apart the front and rear sheilds. Q11 bolts won't be used anymore for the wing and cover re-assembly.
B22
B23
B22
Q11
Q11
Q11
Z03
Q11
60
Z01
INCLUDED TOOLS REQUIRED FOR ASSEMBLY
B22 B23
Z03
Z01
B22
3MM L-Shaped Allen Wrench 4MM L-Shaped Allen Wrench 5MM L-Shaped Allen Wrench 6MM L-Shaped Allen Wrench 8MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench Phillips Screwdriver 8MM Open-End Wrench 17MM Open-End Wrench HS,SB-175 Inner C-Straight Shaped Clamp Tool
Z03
Z11
Z02
Z01 Z02 Z11
Step 2 Z01
Z03 B22
Z03
B22
Description
B22
Flat Washer(φ10)
8
B23
Nylon Nut(M10)
4
Z01
Screw (M10x80L)
4
Z03
Spring Washer(φ10)
4
Z13
Screw (M10x25L)
6
Z17
Flat Washer(φ10)
6
G31
Screw (M6x16L)
4
G32
Flat Washer(φ6)
4
B22 B23
If any items are missing please contact your country’s local MATRIX dealer for assistance.
B22
B23
Z13
Z13
Z13
0mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
Z17
160
Qty
Item
Z17
Z17
Take the plastic cover off before assemble the foot pad
G32
G31
G31 G32
G31
G31
G32
G32
G32 G32
G31 G31
G31
Put the plastic cover on again after assemble the foot pad
G32
G31
G32
Step 5
Step 3 Qty
Item
Description
Z17
Flat Washer(φ10)
6
Z26
Screw (M10x20L)
6
C05
Stopper Plate
4
C50
Internal C Clamp
4
C03
Fixing Sleeve
4
C12
Axle Sleeve
2
Item Description
Qty
Z04 Screw (M10x75L) 4 Z14 Screw (M10x15L) 4 C58 Cap End
2
Item
Description
Qty
Screw (M8x60L)
4
Head pad
Z04 Z04 C05 C50
Back Pad C50
C05
Z04 C50
C03 C12
C03
Z04
C05
C05
C12
C50
Seat Pad
C58
C03 C03 Z17
Z14
Z17 Z26 Z26
Step 4
Step 6 Item
Description
B22
Flat Washer(φ10)
F13
Qty 1
Screw (φ10xM6x45L)
1
Z16
Z17
Flat Washer(φ10)
2
Q02
Right-Front Cover
1
Z18
1
Q03
Rear Cover
1
F11
Screw (M10x105L) Fixing Block
1
B23
Nylon Nut(M10)
1
Q04
Left-Front Cover
1
D18
Screw (M8x22L) Stopper Plate
1 1 Lift the wing and top cover ,then assemble the front and rear shields to the frame.
Z16
Z16
60
F07
Z16 Z16
Cable
D18
Q04 Q03
F11
F13
Z18
Cable
B22
Z17 Z17 B23
F11 F07 F13
leg_press_090902.indd 2
Q02
9/2/09 9:05 AM
9/2/09 9:04 AM
REV. 1.2 PA RT # 0 0 0 0 0 0 0 0 0 0 M AT R I X F I T N ESS SYST E M S | 1 60 0 L A N D M A R K D R I V E COT TAG E G ROV E W I 53 527 USA To l l Fre e 8 6 6 . 693.4 8 63 m a t r i x f i t n e ss . co m Fa x 60 8 . 8 3 9. 8 687 LEG PRESS
G7 SINGLE-STATION STRENGTH IMPORTANT SAFETY INFORMATION
TRICEPS PRESS PLACARD
It is the sole responsibility of the purchaser of MATRIX Fitness Systems products to instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of MATRIX Fitness Systems exercise equipment be informed of the following information prior to its use.
PROPER USAGE Do not use any equipment in any way other than designed or intended by the manufacturer. It is imperative that MATRIX Fitness Systems equipment be used properly to avoid injury. Keep hands and feet clear at all times from moving parts to avoid injury.
MAINTENANCE CHECKLIST
CHECK FOR DAMAGED PARTS 1. DO NOT use any equipment that is damaged and or has worn or broken parts. Use only replacement parts supplied by your country’s local MATRIX Fitness Systems dealer. 2. MAINTAIN LABELS AND NAMEPLATES: Do not remove labels for any reason. They contain important information. If unreadable or missing, contact your MATRIX Fitness Systems dealer for a replacement. 3. SECURING EQUIPMENT: All equipment MUST be secured to the floor to stabilize and eliminate rocking or tipping over. This must be performed by a licensed contractor. 4. MAINTAIN ALL EQUIPMENT: Preventative maintenance is the key to smooth operating equipment as well as keeping your liability to a minimum. Equipment needs to be inspected at regular intervals. 5. Ensure that any person(s) making adjustments or performing maintenance or repair of any kind is qualified to do so. MATRIX Fitness Systems dealers will provide service and maintenance training at our corporate facility upon request.
WARNING: SERIOUS INJURY CAN OCCUR ON THIS EQUIPMENT. FOLLOW THESE PRECAUTIONS TO AVOID INJURY! 1. Never allow children on selectorized strength equipment. Teenagers must be supervised at all times while using this equipment. 2. All warnings and instructions should be read and proper instruction obtained prior to use. 3. Cease exercise if you feel faint or dizzy. Obtain a medical exam before beginning an exercise program
Daily
Clean Upholstery
FREQUENCY
ACTION
As Needed
Lubricate Guide Rods
As Needed
Clean Grips
As Needed
Clean Machine
Bi-Annually
Inspect Frame
Monthly
Inspect Hardware
Monthly
Clean Guide Rods
Daily
Inspect Cables
Upholstery & Grips should be cleaned with a non-ammonia based cleaner (like Simple Green) or a mild soap and water. Guide rods should be lubricated with Teflon based lubricant. Apply the lubricant to a cotton cloth and then apply up and down the guide rods.
PRODUCT SPECIFICATIONS TECH SPECS Overall dimensions
75”L X 43”W x 52”H 946 lbs
Shipping weight
882 lbs
Weight
4. Keep body, hair, clothing and fitness accessories free and clear of all moving parts. 5. Inspect the machine before use. DO NOT use machine if it appears damaged or inoperable. 6. Check to see that the selector pin is completely inserted into the weight stack. 7. NEVER use the machine with the weight stack pinned in an elevated position. 8. Never use dumbbells or other means to incrementally increase the weight resistance. Only use the means provided directly from the manufacturer. 9. This equipment should only be used in supervised areas where access and control are regulated by the owner.
WARRANTY (Valid in USA only)
5 years
Pivot bearings
5 years
Pulleys
5 years
Weight stacks
10 years
Structural parts
10 years
Frame (not coatings)
1 year
Upholstery/cables/grips/springs
3 years
Labor (excluding upholstery/cables/grips)
3 years
Any items not specified
G7-S70 LEG PRESS
Step 1
UNPACKING G7-S70 LEG PRESS
Qty
Item
Description
B22
Flat Washer(φ10)
8
B23
Nylon Nut(M10)
4
Z01
Screw (M10x80L)
4
Z02
Screw (M10x30L)
2
Z03
Spring Washer(φ10)
4
Z11
Arc-flat Washer
2
Thank you for purchasing a MATRIX Fitness product. This machine is an EN957-1 and E9576-2 complaint Class S product. Your MATRIX G7-S70 LEG PRESS is inspected before it is packaged. It is shipped in multiple pieces to facilitate the compact packaging of the machine. Prior to assembly, confirm all the components by matching them with the exploded diagrams. The weight stack is shipped in separate packaging to reduce the weight of this box. Carefully unpack the unit from this box and dispose of the packing materials in accordance with your local laws.
CAUTION
The weight of the G7-S70 LEG PRESS is 531 lbs. (240.9 kg) not including the weight stack. The weight stack tower is packaged completely assembly for ease of installation; use extra caution when removing from its pallet during assembly. The weight stack for this machine is 351 lbs. (159.2 kg). To avoid injury to yourself and prevent damage to the frame components, be sure to have proper assistance removing the frame pieces from this box.
Lift the aluminumn wing and top cover, then take apart the front and rear sheilds. Q11 bolts won't be used anymore for the wing and cover re-assembly.
B22
B23
B22
Q11
Q11
Q11
Z03
Q11
60
Z01
INCLUDED TOOLS REQUIRED FOR ASSEMBLY
B22 B23
Z03
Z01
B22
3MM L-Shaped Allen Wrench 4MM L-Shaped Allen Wrench 5MM L-Shaped Allen Wrench 6MM L-Shaped Allen Wrench 8MM L-Shaped Allen Wrench 10MM L-Shaped Allen Wrench Phillips Screwdriver 8MM Open-End Wrench 17MM Open-End Wrench HS,SB-175 Inner C-Straight Shaped Clamp Tool
Z03
Z11
Z02
Z01 Z02 Z11
Step 2 Z01
Z03 B22
Z03
B22
Description
B22
Flat Washer(φ10)
8
B23
Nylon Nut(M10)
4
Z01
Screw (M10x80L)
4
Z03
Spring Washer(φ10)
4
Z13
Screw (M10x25L)
6
Z17
Flat Washer(φ10)
6
G31
Screw (M6x16L)
4
G32
Flat Washer(φ6)
4
B22 B23
If any items are missing please contact your country’s local MATRIX dealer for assistance.
B22
B23
Z13
Z13
Z13
0mm
10
20
30
40
50
60
70
80
90
100
110
120
130
140
150
Z17
160
Qty
Item
Z17
Z17
Take the plastic cover off before assemble the foot pad
G32
G31
G31 G32
G31
G31
G32
G32
G32 G32
G31 G31
G31
Put the plastic cover on again after assemble the foot pad
G32
G31
G32
Step 5
Step 3 Qty
Item
Description
Z17
Flat Washer(φ10)
6
Z26
Screw (M10x20L)
6
C05
Stopper Plate
4
C50
Internal C Clamp
4
C03
Fixing Sleeve
4
C12
Axle Sleeve
2
Item Description
Qty
Z04 Screw (M10x75L) 4 Z14 Screw (M10x15L) 4 C58 Cap End
2
Item
Description
Qty
Screw (M8x60L)
4
Head pad
Z04 Z04 C05 C50
Back Pad C50
C05
Z04 C50
C03 C12
C03
Z04
C05
C05
C12
C50
Seat Pad
C58
C03 C03 Z17
Z14
Z17 Z26 Z26
Step 4
Step 6 Item
Description
B22
Flat Washer(φ10)
F13
Qty 1
Screw (φ10xM6x45L)
1
Z16
Z17
Flat Washer(φ10)
2
Q02
Right-Front Cover
1
Z18
1
Q03
Rear Cover
1
F11
Screw (M10x105L) Fixing Block
1
B23
Nylon Nut(M10)
1
Q04
Left-Front Cover
1
D18
Screw (M8x22L) Stopper Plate
1 1 Lift the wing and top cover ,then assemble the front and rear shields to the frame.
Z16
Z16
60
F07
Z16 Z16
Cable
D18
Q04 Q03
F11
F13
Z18
Cable
B22
Z17 Z17 B23
F11 F07 F13
leg_press_090902.indd 2
Q02
9/2/09 9:05 AM
